Subscribe via RSS Feed

Asterix Brushless Gimbal V3



Compact simplified design,  lightweight, well-balanced brushless gimbal  for Mirorless  camera.

Asterix  V3  designed to carry mirorless MLC camera whit lens options.  Asterix v3 compatible   new  DJI frame s900 and s1000+  frames for direct mount to damper system

What is new  Asterix v3

  • Direct mount to DJI S900 and s1000+
  • Dimensionally compatible GH4 size camera
  • Yaw axis motor mount compatible 52xx size Hollow shaft and slip ring
  • Roll and Pitch Axis motor mounts compatible 52xx and 41xx size gimbal motors
  • improved camera plate for Pitch gimbal motor can usable Left and Right side
    (One side to be more advantageous than other side for stabilization and video out cable, depending on the lens used and the battery weight)
  • Less Price, because less parts (damper ball, Alum clamps and hex standoff ) for gimbal kit.

Compatible Cameras & Lens

  • Sony Nex 5 to
  • Sony Nex 6, Sony Nex 7
  • Sony Alpha a5000, Alpha a6000
  • Panasonic GH4
  • Canon EOS M,
  • Samsung NX series and similar size cameras
  • Sony 16mm, 20mm, 35mm prime lenses  18-55mm zoom , 16-50mm pancake lens
  • Sigma 19mm, 30mm prime lenses


  • Compact simplified design
  • Lightweight, well-balanced , adjustable,  easy setup,
  • Black anodized high grade aluminum
  • Gimbal   Weight : 230gr.   (whitout motors)
  • Roll motor  base mount hole size 25mm
  • Pitch motor  base mount hole size 25mm
  • Yaw motor base  hole size 25-33mm
  • Yaw motor upper  side  mount hole distance must be 25mm (12, 16,19 mm not compatible)

Suggested Gimbal Motors (optional)

  • GBM5208H Hollow Shaft (with slip ring) Gimbal Motors and similar  for Yaw Axis
  • GBM5208 180T Gimbal motor for Roll Axis
  • GBM5208 and GBM4108 and similar Gimbal Motors for Pitch Axis

Asterix V3 Kit Includes

  • New Gimbal Mount Plate
  • New Camera plate
  • New deep and height adjustable roll and pitch arm
  • M2.5×5 , M3x6 and M3x8 Screw set for motor and gimbal mount





Category: BL Gimbal

Leave a Reply

You must be logged in to post a comment.