Subscribe via RSS Feed

Featured

  • iPower MultiMate MT1806 2300KV

    iPower MultiMate MT1806 2300KV

    iPower MT1806 2300KV iPower Multimate  range – high quality sealed japanese EZO bearings , Soft silicone long cable,  designed specifically for multi-rotors Specification: Motor Kv 2300 RPM / Volt Stator Diameter 18.0 mm Stator Thickness 6.0 mm No. of Stator Arms 12 Magnet Poles 14 No-Load Current (Io/10V) 0.6 Amps Motor Resistance (Rm) 0.117 Ohms […]

  • iFlight BetView 5D-GH3 Full Upgraded Version

    iFlight BetView 5D-GH3 Full Upgraded Version

      Features Plug&Play. Clean design eliminating clutter from wires Lighter in weight(2.5kgs in full package) Pan motor:GBM8017-120T(Hollow shaft) W/damping balls Roll motor:GBM5208H-180T(Hollow shaft) Tilt motor:GBM5208H-180T(Hollow shaft) Aluminum Portable Case BetView Gimbal for 5D Series( Mark Ⅱand Ⅲ)GH3 Total Weight:1360g 24mm lens compatible 5D MarkⅡ and Ⅲ compatible GH3 compatible Pan 360° Tilt 300° Roll ±50° […]

  • iPower GBM2212H-80T - iPower GBM2208H-80T Hollow Shaft

    iPower GBM2212H-80T – iPower GBM2208H-80T Hollow Shaft

    iPower GBM2212H-80T Weight:50g Motor Dimensions:dia 28mm x hgt 26mm Stator Dimensions:dia 22mm x hgt 12mm Copper wire(OD):0.16mm Configuration:12N14P Resistance:15.6 ohms Wind type and termination method:Star style Pre-wound with 80 turns Camera range: 100-300grams(GoPro Size) Box contains: GBM2212H Hollow shaft Motor,3-wire silicon cable,mounting screws x 4pcs Buy Here iPower GBM2208H-80T Weight:38g Motor Dimensions: dia 28mmx hgt […]

  • iFlight Blackopter B105 ARF Octocopter

    iFlight Blackopter B105 ARF Octocopter

    iFlight Blackopter B105 Octocopter has been specially designed for high level professional aerial photography and cinematography. It comes with high tall landing gear, as well as folding frame arms to minimize storage space. Every detail has been designed with the needs of creators in mind, helping them to realize their vision while its light weight […]

  • Boomerang FPV Quad

    Boomerang FPV Quad

    Features Simple rational design was inspired from boomerang. The body consists of four plate. Front and rear arm with motor mount, center plate and battery holder plate on the bottom.  Four screw and four anti vibration ball holds all  together .  Vibration isolated long center plate  provides smooth flight, clear view and more space for FPV equipment.  Longer […]

  • SunnySky X4108S 600kv Motor, ESC, Carbon Propeller Set

    SunnySky X4108S 600kv Motor, ESC, Carbon Propeller Set

    Overview Long life japanese NMB ball bearings Efficient Japanese Kawasaki 0.2mm stator stell Rare earth magnets stable up to 180 c Oxygen free pure copper wires CNC machined Aluminium case 600mm long silicone wire leads Patented balance techniques Unique wiring method elaborate technology Light weight and great exterior design Long time tested by various loading […]

  • Suppo OSD

    Suppo OSD

      Suppo OSD v2.31 w/5Hz GPS Suppo OSD v3.51 w/10Hz GPS version Avaible now! More compact size 26x45mm, improved compatibility with NTSC camera and 10Hz GPS Module Features Dynamic Directional Arrow RSSI Altitude Ladder Speed Ladder Distance to Home Flight Time Battery usage and power guage Easy to use Crisp text, Shadowed for better visbility […]

  • BL Gimbals (more)

  • iFlight BetView 3-axis 32bit Aluminum Gopro Gimbal

    iFlight BetView 3-axis 32bit Aluminum Gopro Gimbal

    iFlight BetView 3-axis Alum Gopro Gimbal-plug and play Specifications:  *Supported Camera: GoPro3, GoPro3+ Black and Sliver *Material: Aluminum alloy & Glass fiber construction *Size: 80 x 90 x 90mm *Total Weight: 315g (not including camera weight) *Power Connection: JST female

    June 13, 2014 | 0 comments | View Post

  • Motor ESC (more)

  • iPower MT2208 1250KV & T-style CF 8055 Set

    iPower MT2208 1250KV & T-style CF 8055 Set

    iPower MT2208 1250KV Specification: Motor Kv 1250 RPM / Volt Stator Diameter 22.0 mm Stator Thickness 8.0 mm No. of Stator Arms 12 Magnet Poles 14 No-Load Current (Io/10V) 0.47 Amps Motor Resistance (Rm) 0.15 Ohms Max Continuous Current 14

    April 8, 2014 | 0 comments | View Post

  • iPower Multimate MT4114 400kv

    iPower Multimate MT4114 400kv

    Features: EZO Japanese bearing, 0.2mm silicon steel sheets, 24N22P(24 arms,22 pole), 180 degree magnets, Dynamic balance, CNC MACHINED ALUMINUM CASE, 45cm long cable Includes iPower MultiMate outrunner Heavy Duty Cross Motor Mount Four M3x6mm Motor Mount Screws Bolt-On style theaded

    October 29, 2013 | 0 comments | View Post

  • AirFrame (more)

  • Scorpion X4 Explorer

    Scorpion X4 Explorer

      Unique Spider Quad for FPV CNC machined aluminium parts Carbon main frame and arm Easy foldable arm DJI H3-2D and Tarot 2 brushless gimbal Compatible 550mm wheelbase size 400g  frame weight Empty take off weight  1.2kg Payload:0—1.2kg Config  (Not includes)

    November 18, 2013 | 0 comments | View Post

  • Other Recent Articles

  • iPower Motors & iPeaka ESC

    iPower Motors & iPeaka ESC

    iPower Brushless Outrunner Motors for Multirotor 2-4s lipo first-class bearing short shaft version , it’s special design for multicopters 45cm wire and 3.5mm bullet connector http://www.radioactives.se/iflight       iPeaka iQ series ESC for Multirotor iPeaka iQ series Speed Controllers are designed for use in multi-rotor type aircraft, and have all of the parameters pre-set […]

    May 12, 2012 | 0 comments | View Post

  • iflight 32bit  Alexmos BGC

    iflight 32bit Alexmos BGC

    Official authorized Gimbal Control Board Specifications Size of the board: 50×50 mm Distance between the mounting holes: 45 mm Diameter of the mounting holes: 3 mm Power supply voltage: 8–25 V Maximum motor current: 1,5 A 5V output current to power external devices: up to 1 A BaseCam SimpleBGC 32-bit The controller can be used […]

    March 31, 2014 | 0 comments | View Post

  • HHG5D 3Axis Handheld DSLR Gimbal 32bit Now!

    HHG5D 3Axis Handheld DSLR Gimbal 32bit Now!

    3 Axis Handheld Brushless gimbal for DSLR Camera. Carbon fiber material with aluminum alloy camera frame. Suitable for CANON 5D Mark II / 5D Mark III, 7D, SONY a900, Nikon D900/D800E/D700/D800.  Total weight of the whole gimbal: 1790g. Max.loading capacity 3kg. Gimbal Motors 1x ipower GBM5208H-200T sealed case w/sliprings on Yaw motor 2x ipower GBM5208-180T sealed […]

    February 22, 2014 | 0 comments | View Post

  • Asterix Brushless Gimbal

    Asterix Brushless Gimbal

      Compact, lightweight, well-balanced brushless gimbal  for Sony Nex camera. All in one design (2 axis and 3 axis with anti-vibration),  designed to carry Nex camera with pancake lens. (16mm and 16-50mm). Well fits to Tarot 650 Quadcopter and Tarot 680 Hexacopter. Features All in one design (2 axis and 3 axis with anti-vibration) Anodized high […]

    February 12, 2014 | 0 comments | View Post

  • iPower GBM5108-120T

    iPower GBM5108-120T

    iPower GBM5108-120T  Sealed Casing Gimbal Motor for Canon 5D Specs: Model NO.:GBM5108-120T Weight:175g Motor Dimensions:60x24mm Stator Dimensions:51x8mm Copper wire(OD):0.18mm Configuration:24N22P Resistance:12.6 ohms Wind type and termination method:Star style Pre-wounded with 120 turns, 5.0mm shaft Flexible Mounting Holes: Bottom mounting holes: (3 holes) 32mm center to center,(4 holes)25mm center to center Top mounting holes: (2 holes)12mm […]

    October 29, 2013 | 0 comments | View Post

  • iPower GBM8017-120T

    iPower GBM8017-120T

    iPower  GBM8017-120T  Gimbal Motor  Camera range: Red Epic,Black magic or similar size camera! Weight:318grams Copper wire thickness: 0.29mm Configuration:24N28P Pre-wound turns : 120 turns DC resistance (ohms): 18.8 Motor dimension: 90*13mm Mounting hole (Top/ bottom ) : 52,33mm Buy iPower Gimbal Brushless Motors DHL Express Shipping. (Free upgrade)

    October 28, 2013 | 0 comments | View Post

  • iPower GBM5208H-180T Hollow Shaft Gimbal Motor

    iPower GBM5208H-180T Hollow Shaft Gimbal Motor

    iPower GBM5208H-180T Hollow Shaft motor comes with Sliprings for the cables, so the motors are free to rotate continuously without twisting the cables.The Slipring inner hole diameter 12.5mm. Specs: Motor Dimensions:63x25mm Stator Dimensions:52x8mm Weight:172g Copper wire(OD):0.27mm Configuration:12N14P Resistance:10.2 ohms Wind type and termination method:Star style Pre-wounded with 180 turns,Hollow shaft Flexible Mounting Holes: Bottom mounting […]

    October 28, 2013 | 0 comments | View Post